Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® A3HG6 HR - PA66-GF30 - BASF

Material Data Center offers the following functions for Ultramid® A3HG6 HR:
unit conversion, PDF datasheet print, comparison with other plastics, application examples, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultramid A datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Informação do produto
Ultramid® A3HG6 HR is a 30% glass reinforced, injection molding PA66 grade. It offers good resistance to
hydrolysis.

Typical applications include automotive radiator mounting frame.
Características de processamento/físicasSeco / CondUnidadeMétodo de ensaio
ISO Dados
Índice de fluidez volumétrico, MVR 25 / * cm³/10min ISO 1133
Temperatura 275 / * °C -
Carga 5 / * kg -
Propriedades mecânicasSeco / CondUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 10100 / - MPa ISO 527
Tensão na ruptura 188 / - MPa ISO 527
Deformação na ruptura 3.3 / - % ISO 527
Resistência ao impacto Charpy , +23°C 77 / - kJ/m² ISO 179/1eU
Resistência ao impacto Charpy, -30°C 63 / - kJ/m² ISO 179/1eU
Res. impacto Charpy c/entalhe, +23°C 11 / - kJ/m² ISO 179/1eA
Res. impacto Charpy c/entalhe, -30°C 9 / - kJ/m² ISO 179/1eA
Propriedades térmicasSeco / CondUnidadeMétodo de ensaio
ISO Dados
Temperatura de fusão, 10°C/min 260 / * °C ISO 11357-1/-3
Temperatura de deflexão térmica, 1.80 MPa 249 / * °C ISO 75-1/-2
Outras propriedadesSeco / CondUnidadeMétodo de ensaio
Absorção de água 5.5 / * % Sim. to ISO 62
Absorção de umidade 1.7 / * % Sim. to ISO 62
Densidade 1370 / - kg/m³ ISO 1183
Características
Processamento
Moldagem por injeção
Resistência Química
Estabilidade hidrolítica
Aplicaciones
Automóvel
Disponibilidade regional
América do Norte
Outras informações
Moldagem por injeção
PROCESSING
injection molding, Melt temperature, range: 280 - 300 °C
injection molding, Mold temperature, range: 80 - 90 °C
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.